LSOperator Enumeration¶

enum
localsolver.
LSOperator
¶ Mathematical operators available for modeling. These operators are used to type the expressions created in a LocalSolver optimization model.
See: LSModel See: LSExpression 
Bool
¶ Boolean decision. Decisional operator with no operand. Decision variable with domain
{0,1}
.

Float
¶ Float decision. Operator with two operands that represent the lower bound and the upper bound of the decision (domain
[lb, ub]
). The bounds must be constants (integers or doubles).Since: 4.0

Const
¶ Constant. Operator with no argument. Constants can be booleans, long or doubles. Note that constants 0 or 1 are considered as boolean. Constants are implicitly created when passing long or double arguments to
LSModel.CreateExpression
orLSExpression.AddOperand
. They can also be created with the dedicated functionLSModel.CreateConstant
.

Sum
¶ Sum. Nary arithmetic operator.
SUM(e1, e2, ..., eN)
is equal to the sum of all operandse1, e2, ..., eN
. This operator returns an integer if all the operands are booleans or integers and a double as soon as one operand is a double.With collections (lists, sets) or ranges
This operator can also be used with
Range
,List
orSet
to create expressions with a dynamic number of operands. In that case, this operator becomes a binary operator that takes a range, a list or a set as first operand and aLambdaFunction
as second operand. The operator will call the function on each value of the range, list or set and will sum all the values computed and returned by the function.

Sub
¶ Substraction. Binary arithmetic operator.
SUB(x, y)
is equal to the value ofx  y
. This operator returns an integer if the two operands are booleans or integers, and a double as soon as one operand is a double.Since: 4.0

Prod
¶ Product. Nary arithmetic operator.
PROD(e1, e2, ..., eN)
is equal to the product of all operandse1, e2, ..., eN
. This operator returns an integer if all the operands are booleans or integers, and a double as soon as one operand is a double.With collections (lists, sets) or ranges
This operator can also be used with
Range
,List
orSet
to create expressions with a dynamic number of operands. In that case, this operator becomes a binary operator that takes a range, a list or a set as first operand and aLambdaFunction
as second operand. The operator will call the function on each value of the range, list or set and will compute the product of all the values returned by the function.

Max
¶ Maximum. Nary arithmetic operator.
MAX(e1, e2, ..., eN)
is equal to the maximum value among all operandse1, e2, ..., eN
. This operator returns an integer if all the operands are booleans or integers, and a double as soon as one operand is a double.With collections (lists, sets) or ranges
This operator can also be used with
Range
,List
orSet
to create expressions with a dynamic number of operands. In that case, this operator becomes a binary operator that takes a range, a list or a set as first operand and aLambdaFunction
as second operand. The operator will call the function on each value of the range, list or set and will find the maximum value among all the values returned by the function.

Min
¶ Minimum. Nary arithmetic operator.
MIN(e1, e2, ..., eN)
is equal to the minimum value among all operandse1, e2, ..., eN
. This operator returns an integer if all the operands are booleans or integers, and a double as soon as one operand is a double.With collections (lists, sets) or ranges
This operator can also be used with
Range
,List
orSet
to create expressions with a dynamic number of operands. In that case, this operator becomes a binary operator that takes a range, a list or a set as first operand and aLambdaFunction
as second operand. The operator will call the function on each value of the range, list or set and will find the minimum value among all the values returned by the function.

Eq
¶ Equal. Binary relational operator.
EQ(a,b) = 1
ifa == b
, and0
otherwise. This operator returns a boolean.

Neq
¶ Not equal to. Binary relational operator.
NEQ(a,b) = 1
ifa != b
, and0
otherwise. This operator returns a boolean.

Geq
¶ Greater than or equal to. Binary relational operator.
GEQ(a,b) = 1
ifa >= b
, and0
otherwise. This operator returns a boolean.

Leq
¶ Lower than or equal to. Binary relational operator.
LEQ(a,b) = 1
ifa <= b
, and0
otherwise. This operator returns a boolean.

Gt
¶ Strictly greater than. Binary relational operator.
GT(a,b) = 1
ifa > b
, and0
otherwise. This operator returns a boolean.

Lt
¶ Strictly lower than. Binary relational operator.
LQ(a, b) = 1
ifa < b
, and0
otherwise. This operator returns a boolean.

If
¶ IfThenElse. Ternary conditional operator.
IF(a, b, c)
is equal tob
ifa = 1
, andc
otherwise. The first operand must be a boolean (that is, equal to 0 or 1). This operator returns a boolean if the three operands are booleans, an integer if the second and third operands are integers, and a double if the second or the third operand is a double.

Not
¶ Not. Unary logical operator.
NOT(a) = 1  a
. The operand must be boolean (that is, equal to 0 or 1). This operator returns a boolean.

And
¶ And. Nary logical operator.
AND(e1, e2, ..., eN)
is equal to 1 (true) if all the operandse1, e2, ..., eN
are 1, and 0 otherwise. All the operands must be boolean (that is, equal to 0 or 1). This operator returns a boolean.With collections (lists, sets) or ranges
This operator can also be used with
Range
,List
orSet
to create expressions with a dynamic number of operands. In that case, this operator becomes a binary operator that takes a range, a list or a set as first operand and aLambdaFunction
as second operand. The operator will call the function on each value of the range, list or set and will return 1 if all the values returned by the function are 1 and 0 otherwise.

Or
¶ Or. Nary logical operator.
OR(e1, e2, ..., eN)
is equal to 0 (false) if all operandse1, e2, ..., eN
are 0, and 1 otherwise. All the operands must be boolean (that is, equal to 0 or 1). This operator returns a boolean.With collections (lists, sets) or ranges
This operator can also be used with
Range
,List
orSet
to create expressions with a dynamic number of operands. In that case, this operator becomes a binary operator that takes a range, a list or a set as first operand and aLambdaFunction
as second operand. The operator will call the function on each value of the range, list or set and will return 0 if all the values returned by the function are 0 and 1 otherwise.

Xor
¶ Exclusive or (also called “xor”). Nary logical operator.
XOR(e1, e2, ..., eN)
is equal to 0 if the number of operands with value 1 amonge1, e2, ..., eN
is even, and 1 otherwise. Remarkable case:XOR(a,b) = 1
ifa == b
, and0
otherwise. All the operands must be boolean (that is, equal to 0 or 1). This operator returns a boolean.With collections (lists, sets) or ranges
This operator can also be used with
Range
,List
orSet
to create expressions with a dynamic number of operands. In that case, this operator becomes a binary operator that takes a range, a list or a set as first operand and aLambdaFunction
as second operand. The operator will call the function on each value of the range, list or set and will return 0 if the number of value 1 returned by the function is even, and 1 otherwise.

Abs
¶ Absolute value. Unary arithmetic operator.
ABS(e) = e >= 0 ? e : e
. This operator returns an integer if the operand is a boolean or an integer, and a double otherwise.

Dist
¶ Distance between two numbers. Binary arithmetic operator.
DIST(a,b) = ABS(ab)
. This operator returns an integer if the two operands are booleans or integers, and a double as soon as one of the operand is a double.

Div
¶ Division. Binary arithmetic operator. This operator always returns a double. Note that until version 4.0, the division was an integer division if both operands were integers.

Mod
¶ Modulo (remainder of the integer division). Binary arithmetic operator.
MOD(a, b) = r
such thata = q * b + r
withq
,r
integers, wherer
,a
have the same sign andr < b
. The operands must be integers or booleans. This operator returns an integer.

Array
¶ Array. An array is a collection of elements. Indexes begin at 0. It could be used with operators like
At
orScalar
. An array doesn’t have a value by itself, but can contain operands of type boolean, integer, double or array (for multidimensional arrays). All the elements of an array must be of the same type.With ranges
This operator can also be used with
Range
to create an array with a dynamic number of elements. In that case, this operator becomes a binary operator that takes a range as first operand and aLambdaFunction
as second operand. The operator will call the function on each value of the range and the returned values will be used to populate the array.Since: 2.1

At
¶ Returns the element at specific coordinates of an array or a list.
For arrays
The first operand must be the array and the other operands must be the coordinates of the element to get. The number of coordinates depends on the dimension of the array. Thus AT(myArray, i) returns the i element of the onedimensional array myArray. This operator returns a boolean, an integer or a double according to the type of the operands in the array. If one of the specified coordinate is out of range, the evaluation of the expression will fail.
For lists
The first operand must be the list and the second operand must be the index of the element to get. If the index is out of range (index < 0 or index > count(list)), the evaluation of the expression will not fail but will return 1.
Since: 2.1

Scalar
¶ Scalar product.
SCALAR(a, x) = sum(a[i]*x[i])
wherea
andx
are two onedimensional arrays. This operator returns an integer or a double according to the type of the operands in the arrays.Since: 2.1

Ceil
¶ Ceil. Unary arithmetic operator. Returns a value rounded to the next highest integer. The operand can be a boolean, an integer or a double. This operator returns an integer.
Since: 3.0

Floor
¶ Floor. Unary arithmetic operator. Returns a value rounded to the next lowest integer. The operand can be a boolean, an integer or a double. This operator returns an integer.
Since: 3.0

Round
¶ Round. Unary arithmetic operator. Returns a value rounded to the nearest integer. The operand can be a boolean, an integer or a double. This operator returns an integer.
Since: 3.0

Sqrt
¶ Square root. Unary arithmetic operator. The operand can be a boolean, an integer or a double. This operator returns a double.
Since: 3.0

Log
¶ Natural logarithm (basee). Unary arithmetic operator. The operand can be a boolean, an integer or a double. This operator returns a double.
Since: 3.0

Exp
¶ Basee exponential. Unary arithmetic operator. The operand can be a boolean, an integer or a double. This operator returns a double.
Since: 3.0

Pow
¶ Power operator.
POW(x, y)
is equals to the value ofx
to the power ofy
. The operands can be booleans, integers or doubles. This operator returns a double.Since: 3.0

Cos
¶ Cosine. Unary arithmetic operator. The operand can be a boolean, an integer or a double. This operator returns a double.
Since: 3.0

Sin
¶ Sine. Unary arithmetic operator. The operand can be a boolean, an integer or a double. This operator returns a double.
Since: 3.0

Tan
¶ Tangent. Unary arithmetic operator. The operand can be a boolean, an integer or a double. This operator returns a double.
Since: 3.0

Int
¶ Integer decision variable. Operator with two operands that represent the lower bound and the upper bound of the decision (domain
[lb, ub]
). The bounds must be integer constants.Since: 5.0

Piecewise
¶ Piecewiselinear function operator. The piecewise linear function is defined by two arrays of numbers giving the breakpoints of the function. This operator has exactly 3 operands: The first two operands must be two arrays of equal sizes (necessarily larger or equal to 2). These arrays must contain constant numbers (integers or doubles). The first array must contain numbers in ascending order. The third operand must be an integer or a double expression. The evaluation of the piecewise will fail if the value of the third operand is strictly smaller that the first element of the first array, or strictly larger than the last element of the first array. This operator returns a double.
PIECEWISE(x,y,z)
returns the image of z by the function defined by geometric points(x[0],y[0]), (x[1],y[1]), ..., (x[n1],y[n1])
, For instancePIECEWISE(ARRAY(0, 50, 100), ARRAY(0, 10, 100), 75)
returns55
.Discontinuities are allowed in the definition of the function, that is to say that two geometric points can share the same xcoordinate. By convention the value taken by the function at such a discontinuous point is the one associated to the last occurrence of this xcoordinate in array x. For instance
PIECEWISE(ARRAY(0, 50, 50, 100), ARRAY(0, 0.1, 0.9, 1), 50)
returns0.9
;Since: 5.0

List
¶ A list is an ordered collection of integers within a domain
[0, n1]
wheren
is the unique argument of this operator. Mathematically a list is a permutation of a subset of[0, n1]
. This operator takes exactly one operand: a strictly positive integer constant. All values in the list will be pairwise different, non negative and strictly smaller that this number.The elements of the list can be accessed individually with the operator
At
.Since: 5.5

Count
¶ The number of elements in a collection. This operator takes exactly one argument of type list and returns an integer.
Since: 5.5

IndexOf
¶ The index of a value in a list (1 if the value is not in the list). This operator takes exactly two arguments: the first one is a list, the second one is an integer expression.
Since: 5.5

Partition
¶ Partition. Nary logical operator.
PARTITION(c1, c2, ..., cN)
is true if all lists or setsc1, c2, ..., cN
form a partition of their common domain. All the operands must be of the same type and on the same range.Since: 5.5

Disjoint
¶ Disjoint. Nary logical operator.
DISJOINT(c1, c2, ..., cN)
is true if all lists or setsc1, c2, ..., cN
are pairwise disjoint. All the operands must be of the same type and on the same range.Since: 5.5

ExternalFunction
¶ External function. External functions are used to compute the value of expressions from external functions written with your favorite programming language. External functions are created with the dedicated methods
LSModel.CreateIntExternalFunction
orLSModel.CreateDoubleExternalFunction
.See: LSIntExternalFunction See: LSDoubleExternalFunction Since: 9.5

Call
¶ Call a particular function. The first operand must be a function (like
ExternalFunction
,BlackBoxFunction
orLambdaFunction
). The other operands are passed to the function as arguments. If the function is not a external function, the number of operands must match the number of arguments of the function.Since: 6.0

LambdaFunction
¶ Lambda function. Lambda functions are created with the dedicated method
LSModel.CreateLambdaFunction
.Since: 9.5

Argument
¶ Argument of a function. Arguments are automatically and implicitely created when you create a function with method
LSModel.CreateLambdaFunction
.Since: 7.0

Range
¶ Range expression. This operator takes exactly two integer operands. The first one is the lower bound (inclusive), the second one is the upper bound (exclusive).
A range doesn’t have a value by itself but can be used with Nary operators like
Sum
,Prod
,Min
,Max
,Or
,And
,Xor
orArray
to create expressions that have a dynamic number of operands.Since: 7.0

Contains
¶ Contains.
contains(l, v)
is true if and only if the listl
contains the valuev
. This operator takes exactly two arguments: the first one is a list, the second one is an integer expression.Since: 7.5

Set
¶ A set is an unordered collection of integers within a range [0, n1] where n is the unique argument of this operator. This operator takes exactly one operand: a strictly positive integer constant. All values in the set will be pairwise different, non negative and strictly smaller that this number. Contrary to the
List
operator, elements in a set are not ordered and cannot be indexed withAt
. Sets can only be manipulated with lambdas and nary operators likeSum
,Min
,And
, ...Since: 8.0

BlackBoxFunction
¶ Blackbox function. Blackbox functions can be used to optimize functions that are computationally expensive. For more information about blackbox optimization, please see the advanced features.
See: LSDoubleBlackBoxFunction Since: 9.5
